Home  |   About us  |   Messages  |   Contact us  |   News
 · SKF bearings
 · FAG bearings
 · NSK bearings
 · INA bearings
 · NTN bearings
 · KOYO bearings
 · TIMKEN bearings
 · NACHI bearings
 · IKO bearings
 
 
 

News

According to measuring clearance to choice TIMKEN.

 
Date:2011-12-09 From:SKF bearings
 

To buy timken bearing, we usually measure timken bearing clearance to ensure that we can choose the correct timken bearing, then timken bearing clearance exactly is how one and the same, now give everyone to introduce timken bearing clearance.

Timken bearings clearance introduces basic

The so-called timken bearing clearance, that is, timken bearing in not to install on a shaft or timken bearing box, which will be on one side of the outer circle or fixed, and then not be fixed a party radial or axial movement of the move. According to the movement direction, can be divided into radial clearance and axial clearance. Timken bearing clearance can be divided into what status? Timken bearing in different state its clearance change accordingly, in practical terms, can be divided into:

1, original clearance

The original timken bearing clearance means timken bearing complete installed on the machine after, in the free state clearance. In fact the original clearance not through the measurement is hard to know. So the original clearance often use inspection clearance instead.

2, effective clearance

Effective clearance or says work clearance means timken bearing in installation in the host, in certain load, the temperature reaches a certain stability of operation state, timken bearing the existing in the actual clearance. Obviously, effective clearance than work clearance small.

3, timken bearing clearance role and requirements

Existing in timken bearing clearance is to ensure that timken bearing can be flexible to work without block, but also can ensure that requirements timken bearing smooth operation, timken the axis of the bearing no significant settlement, and take the number of the roller of load as many as possible.

Timken bearing clearance installation

In the installation clearance for the internal temperature difference and timken bearing the size of the amount produced change after the clearance called "effective clearance". Timken bearing installation withstand the mechanical load when placed the clearance, namely effective clearance plus timken bearing load effects of elastic deformation of after so called "work clearance".

Through the above, I think everyone to the timken bearing clearance should be well know, later in the process of everybody to choose timken bearing can reference above for you to choose that suits your timken bearing products.

 
Pre:The TIMKEN bearings company supports the Chinese Wind power   Next:NSK bearings attended automobile exhibition
 
 
 
SKF bearings|FAG bearings|NSK bearings